I just picked up a set of 18" is350 wheels. Will these bolt right up to my 93' or will I have to do work to make them fit. I cant put them on my truck right now as I am on my way to work. Cant wait to see how they look

 

I would assume the center bore would be smaller on the wheels.

 

Ok, well for what I paid for them I can spend some on having that done

 

measure from bolt hole to bolt hole.

 

I did it already...

bore them out (67.06mm) on the fronts and backs OR you can run 1/4" spacers with longer (rear) studs up front. I ended up boring mine... much easier.
Check out my thread:
http://www.toyotaminis.com/forum/build-up-project-threads-25/newbie-here-ive-got-pictures-3281/

 

I ran wheel adapters for my IS rims

 

Ok sweet. I may try the spacers at first just to get the truck off blocks. Your truck was one of the reasons I looked at those wheels. Where did you have the wheels bored out at. I cant wait to get off work to see how they look.

 

cant wait to see ur truck off blocks lol

 

Ok so I played with them this morning and the back looks like a spacer will be ok, but not sure about the front. Can anyone recomend placet to have it done in riverside/corona area.

 

If you have a router you can do it yourself. There's a guy on YouTube that shows you how to do it on escalade rims

 

Ok sweet. I will have to check that out

 

Just not sure if somewhere would do it since it would be a safety thing

 

Find a rim shop. i know theres plenty out in LA so you should have no problem doin it. GEt the specs on the center bore of the yota and have them do it.

il have to go back and check how deep they need to bore the wheels to clear the biggest part of the hub

 

Yeah checked it out, not sure I want to attempt it

 

hey man just get 1/4 inch spacer all the way arround you'll be fine they wont rub at all.

if you do it right you can put the cap over the hub also

heres my wheel with the stock center bore

 

So I got the center bores cut in the front and a spacer in the rear. Every ting fits good and looks great. I will put pictures up tonight. But cant wait to drive it again.

 

ahhh i wana c it lol sounds sweet hahhaha

 

Here they are. There are no torsion bars in the truck right now so thats why the nose is so low.

 

that looks great man with a good paint job it would look even better

 

Yeah a new paint job is on the agenda. It was all one color when i had all the fiberglass on. I need to get it regestered and smogged first. I was like a kid on Christmas on the way back from the tire shop yesterday.