It works fine. I just did it. Amazing difference having a decent idler and pitman on the truck. Now I just need to tighten up the steering box a...
I’m rarely on here, so email would be best [email protected]
I have the center link, idler(bushing is shot) and pitman(loose joint) I also have new(low miles) 555 inner and outer tie rods as well as lower...
I’d be gutted for it to be damaged when it arrived but I do have a nasty chip in my 71 windscreen
What is your location? Ah I see how it works. PacNW... that’s far for me
What motor is that? Maybe the lighting is bad but it’s like nothing I’ve ever seen
Update: I bought 76 outer tie rods and they fit my tie rod sleeves no problem and tighten up properly in the steering knuckles bolted to my new...
I should disclose that my lower control arm did need slight hole drilling on the three m8 holes and slight filing for the m10 hole to fit the...
I just got done with swapping 77 disc spindles onto my 71 Hilux. I used new 76 lower ball joints as they are larger on the later spindle. I do not...
Do some reading on toymods, an Australian site, the 18r is there dirt common. They are all about 18rg's, nonetheless over the years there is quite...
What a cool and well documented rebuild. How did it turn out? Running well?
Any chance both you guys got any pictures of your combustion chambers on the 18rc versus the 8rc head? I'm assuming the compression difference is...
Also the napa gold 1034 oil filter clears the long tube
that would probably be your rod bearings
Separate names with a comma.