wiring fun

 

thats nothing.....

 

Wiring is not too bad. At least yours isn't burnt. After my truck burned I was trying to decipher the harness I had mod'd so I could copy it onto another. I just figured out last night I was missing the plug for the A/C controls. I got the harness out of a non-ac truck but it had the connectors for the a/c box thing. Turns out someone cut the plug off for controls...back to burnt wire box.

-Ryan

I'm looking forward to seeing your RHD swap finished. Going to be cool.

 

i agree that isnt that bad.. but his electriction is in another town lol

 

i dont need you,lol you need me

 

i should have all the wiring done by this weekend and try to get it run again. at lest that the plan

 

throttle

How are you routing the throttle cable? I know the throttle body is on the right side, but what does the pedal mount mount look like in the cab? And is the cable near the tire?

I just did mine last night and it would have been so much easier with some pics of a factory one, lol. I ended up using a 90 degree turn thing from a motorcycle clutch so the cable comes off the pedal inside the cab and goes towards the left side, then comes out the firewall to go to my carb. (my cable has to route to left side).

Just curious how your's is set-up.

Thanks,
Ryan

 

I have all stock stuff. I will take some pic of it for you. Do you need any other pic ?

 

No, just curious more than anything.

 

i work on the EGR today i will tig it up tomorrow now i need to clean the mount up and tig them all to toghter

 

Very nic man, So im taking it that it should be done this weekend?

 

i have it done when i get a 2wd steering box

 

i finished the EGR and the clutch is in and the line ran
then i rap it so it wouldnt melt the clutch resvor then i drill and tap the intake for the EGR gas temp. sensor. i pull the thotlabody off to blow out the shaving wo la

 

great work. keep it up

 

i wonderhow the smog guy will like that lol.

 

i got the front end welded back on and some interior in

 

what are you gonna do about the power window switches?

nice build man...

 

Nice job man , looking good

 

im going to filp the door wiring and get the switch from oversea