Disappointing night again, all though I'm happy nothing broke... *knock on wood* The damn clutch hydraulics wouldn't let 2nd and 3rd engage... Anyway, here's some vids 22r all motor took! On our way: http://www.youtube.com/watch?v=fszDs3dRe-w Being a nice guy, gave the dude a buck! My son was with me so, I wanna teach him a few good hearted things ya' know! Plus a small kine slide... lol http://www.youtube.com/watch?v=xe6WLPxocng 1st run, i'll let the vid do the talking: http://www.youtube.com/watch?v=obC3xW4QLxk 2nd run, thought I broke something... Turned out it was just a hard launch... so hard it came out of 1st gear!: http://www.youtube.com/watch?v=s549-AFZY5A 4th or 5th run with a buddy's 85 nissan 720: http://www.youtube.com/watch?v=AFOQUgD5f4k Bonus vid: http://www.youtube.com/watch?v=4sRLH2CF8hE **Big thanks to the boys and 22R and Raffi for the support and watching my son during the runs! Hopefully next trip out can go smoothly and everything works as it should!
you have a sharp looking truck man, i really like it. what all is done to the engine? it sounds healthy as ****
Nice looking truck man and good runs. I like the little side ways turn after giving the guy the dollar. Well done bro
I think the fastest he ran was 11.1 But like he said the clutch didnt compleatlty disingage during fast 1-2 or 2-3 shifts. Weak master (I think) because we tried to bleed it at the track to no avail. Thing hooks hard and a real strong engine. Times should have been alot better..
Fastest was a 10.3 followed by 10.5, 10.7's respectively... The only 11 sec pass was when Raff drove! Had to let him satisfy the itch! I'm thinking easy 9's probably high 8's if I can get it to shift and not wheel hop on off the line... Try it again next time...
Haha son, I'm old enough to be your dad! Gently massaged hybrid... Yes, 1/8th times... U want a parts list?
Stock 82 short block 20r head 1mm oversize SS valves Dual valve springs Ti retainers Mild porting 310 regrind cam Dual 44 mikunis Doug thorley, tri y 2-1/2 thrush flow master 2 chamber copy cat muffler Msd 6al 9 lb lc or fidanza flywheel (forgot which one exactly) Centerforce 2 pressure plate/trd stage 2 disc Newly installed 4:56/locker So far I'm into the motor and drive train just a hair under 1k, i got most of my stuff used and cheap from friends or eBay...
Oooooo I like the sound of the sides Par! Easy to dip in the 9's the next time you go to the track! Shoooots
This longblock is for sale!! Need the funds for a lazer hybrid build... Minus header, flywheel/clutch and distributor... Longblock is from oil pan to valve cover.... Shortblock has less than 5K on new bearings and rings... **Mikuni 44's and intake included!! I will re-jet for your state if needed... $1500 + shipping... I can strap it to a pallet and drop it off at a freight forwarder within 25 miles for free...
