pretty sure those will only line up with the flush lookin 4runner lights

 

Like Bernie said, the 92-95 4runner corners only line up with the 92-95 4runner grille. The 4wd pickup corners should be all the same.

 

damn that sucks. So now I either gotta get 4x4 pickup corners or the full 4Runner front end? which do you guys thnk is better to do?

 

That would be a personal preference. I like the full 4runner front end including headlights. I just think its way played out already. I would still prob do it if I stumbled on the parts. Especially since I already have the billet insert for the 4runner grille.

 

i chose 4wd corners and 2wd grille.
92-95 2wd grille plain sexy.


anyway, 4runner front end is done everywhere, its nice, but getting a little outplayed. and its a personal choice.

i think the composite headlights are also a plus.

 

Like i said

 

Is the 95 4runner grille a straight bolt on or does it need to be fab up alittle?

 

Me too



The 4runner grille needs minor drilling to the rad support

 

yeah I like the look of the 2wd grille with the 4wd corners better. The fenders are off a 4Runner so these would be the ones I need for my 2wd grille then right? http://cgi.ebay.com/ebaymotors/1989...r_Truck_Parts_Accessories&hash=item335e9aaa9f

 

90-91 4runner corners
89-95 4wd corners

are your choices for the "short" 4wd corners. They are identical.

92-95 4runner is the "long" and what you currently have.



As far as I know, 4runner and 4wd fenders are the same

 

I did the same mistake, But I made it work, By using some nuts and bolts to stand it off about half and inch, since the original owner bent the drivers side up it worked out.

I didnt take a picture of all of them but you get the idea.


that tape is temporary tell I figure out a way to mount the front of the corner light.


That notch is visible, but its no biggy to me.

 

My bad!

And all you said was "I think those are 92-95 4runner corners", but my bad. Wasn't trying to step on anyone's toes.

 

lol no toes stepped on here! I was just emphasizing the importance of your post.

 

if you get 4x4 fenders you will need to get 4x4 coner lamps too.
Would a 1999 bumper fit a 1995? Because they are differently shaped and i think they look better, and i already have the valance part

 

were did you get your lip from?

 

YUP,the full 4runner clip is pretty much played out and done every were.thats why my budd did his front clip this way:

 

First off I have seen everyone of these questions answered before!!
Search people!!! Use search!!!

The 89-91 grille is different than a 92-95 grille

You can use any corners or grille from a truck 2wd or 4wd or from a runner and it will all interchange and line up
Only from 89-91

In 92 the runner got a whole new grille and headlights with new corners also
If you want this you have to do the whole swap
(except for the grille spacing mod above)

The trucks 2wd and 4wd can still interchange as long as their both 92-95 trucks grille/corners

89-91 corners will fit to a 92-95 truck... But the trim of the lenses is thinner on the 89-91 and will not line up properly

 

Not really getting the big difference?
A 92-95 runner grille with 2wd corners that don't line up???
I can see the gap in the pictures
Must look like crap close up!
)8