im looking for a good 20r head...stock. having a hard time finding one here! if anything i have a 22r head with EFI manifold to swap? if not then name your price!
I have a couple of them .. but I`m a ways away .. let me know if you cant find anything closer , as i have some fairly good shipping rates .. .
wow that is far!!! what do you want for one?? or possibly 2..haha im all the way in guam so i think anywere i can find will be farrrrr. are they complete with valves and rockers?? or just bare heads?
so I checked today .. I have only 1 (the other is 22r) it is complete with valves and such .. I also have the rocker support , and up to the valve cover .. not sure about the cam though .. the head is in the back corner behing my winter tires .. so I couldnt squeeze in there to check .. I know the head is good .. so I would think it has to be worth $80.00 bucks for all mentioned I have a "deal" with DHL comming "down the pipe" .. so I should be able to get some very good shipping rates as well .. let me know if your interested . .
sounds like a plan! think you can get a pic of it soon?? all i have to do is sell my 22r head and ill surely grab yours.
So a 20r head can go on a 22r engine? If so what does this do for the truck if it is swapped? What all do you need to swap it over? Thanks guys
yes. higher compression and better airflow. depends on what you got for a bottom end! there should be a THREAD with all this listed...look it up.
tell ya what .. let me know when you have sold your head .. and want mine .. I will then spent the hour it's going to take , getting to it and take pictures for you ... let me know [email protected] .
haha ok ill take your word for it.. wouldnt mind grabbing some of those hi clearance fenders too maybe next time!
complete head, minus one cam bolt. its been sitting for about 20 yers in the shop so you would need a valve job and a hot tank...other then that read to rock. No manifolds just a bare head, valves, springs, valve cover ect ect
ill take pics of it tomorrow first, you tell me what you think its worth, i donno how much these go for...i would like to get 200 for it, but i donno if thats high for the condition its in. where are you located, i have to figure out shipping as well...
Sorry guys but does anyone know the link to a thread on the 20r head and or how to put it on and the advantages of having it on instead of my stock 22r head? Thanks
In a nutshell... Need a 82-early 84 22R shortblock. (the domed piston dual chain 22R). Later engines "could" work, but I wouldnt reccomend it. A 22R headgasket. A 20R intake and gasket. Stock exhaust works on both heads. Advantages... If you relate it to IDK, chevy heads. The 22R head is the 145 hp 82 Camaro smogger head The 20R head is the 300hp 69 Camaro angle plug fuelie head. Not quite that much HP from bolting it on. Somewhere between 30-35 HP is avarage for alot of people. I likes the 20R because of how thick the castings are in the ports. ALOT can be taken out of them.
give me a zip code ill look up how much shipping should be. I bet its going to be a lot though...geez guam, never shipped there before.
I got one chelu but, it needs to be rebuilt... #4 spark plug hole is stripped also a couple of the exhaust studs too. Valvetrain intact, no rockers (threw it away, steel kind). I also have a stock 20R intake if needed... Price: $50 + shipping... I'm guessing around $50 for priority mail to Guam...
