The shocks i have are the factory ones since 1988 so i wanted to replace them since they're not really absorbing any shock. The torsions are cranked and the rear has a mid leaf removed what shocks do you recomend for this set up? thanks

 

nevermind just saw the other post on shocks

 

lol Drop Shocks!

 

Bilstein bilstein bilstein:d

 

Belltech SP's are garbage. GARBAGE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

My **** provides better performance than these piece of craps.....

 

KYB Gas Adjust are the best for the money.

 

i like nitro drops..
toxics is good too
so is monroe

but kyb adjustable is the best bet

 

i like my kyb's. i got the back shocks for like 60 or 70 total i believe. i want to say they are mr2 shocks. thats on a stockfloor truck so we just measured what we needed. it's the dual bolt hole style, so they may work on a lowered truck pretty well. I think they are ~11-12 collapsed.

 

I'm runnin Toxic drop shocks. Pretty satisfied with them, but I haven't ran anything else.

 

just don't buy belltech.

 

i heard most of these shocks are good but has n e one tried to relocate the bracket lower on any of their trucks to just use the stock ones? i know u cant really do it in the front but what bout the rear?

 

would anyone know the correct shock length for a 3inched drop truck. im tired of my shocks bottoming out

 

Not sure bout the length, but I know the Toxic drop shocks can up to a 3" drop on the front shocks and up to a 4" drop on the back.

http://www.stylintrucks.com/parts.a...ocks&canned_results_trigger=&partfamilyid=552

I'm running a 2/3 drop with Belltech drop spindles in front and 3" blocks in back. I still have most of the factory ride in front, just a little rough in back. Doesn't bottom out though, maybe hit the bump stop a few when I have a load in the truck.

 

i think it was monroe that u can custom order shock/coilover setups for any application you just need to give them your measurements. i wanted to run this setup in the back.

 

you said coilovers, are you planing on doing a 4 link or coilover with leafs?
when i dropped my 84 chevy i used toxics in the front and bilstiens in the rear. i know if you go to any lift or drop shop and tell them what your doing they can order any shock to the dementions you need.

 

i was jus gonna go coils with leafs i dont wanna 4 link unless there is a bolt on kit for them.

 

i use these bad boys on all four...M4028G DOETSCH NITROGEN SLAMMER SHOCKS ..look um up..super cherrrry..pricey but well worth it i say..

 

you don't run leafs and coil. you run either or. just to clear that up.

 

noooooo.... you know the shocks with the little coil springs already on them, there like the load helpers, idk hard to explain. heres a pic tho to clarify things, sir.

 

KYB Monomax