That suxx man!

 

All good we got it under control. Got to order more parts today!

 

Elec fan, intercooler pipes ( black powder coated and black couplers ) and black intercooler ordered and on there way.

 

Arrived ^

 

Is this too big???

 

Yeah that's too big.. You should give it to me and get yourself a smaller one.. Since it's soooo big I'll take it off your hands for free.... =P

 

haha sorry already got it ready to be mounted... bye bye bumper lol

 

2jz truck running on new fuel system - YouTube

so here is a video of the truck back and alive. MUCH better then the old ones. It also shows how the fuel system is done.

Ran into and issue with the TPS sensor conector being all messed up and causing Idle issues. This is what was wrong...

 

Your truck is SICK! I've been wanting to do a 7mge swap into my '86 for a while now... Am i correct, that 5m mounts will locate the supra drive train in the same position as the stock 22r (no drive shaft modification)? Or is the 2jz swap a completely different can of worms?

 

2jz is different then the 7m. The big issue is that mine is a front sump oil pan so custom mounts were made. If it was a rear sump there is a company called BIC that makes mounts for a 2jz or 1jz swap. With the 7m I think the 5m will work. I do not know about if the drive train sits in the same spot with a full 7m swap but for peace of mind I would just have a custom shaft made if you plan to do the swap. Also do a turbo swap if your going to do it... Boost is the best

 

I'm in the middle of a 7m swap. Yes the 5m motor mount brackets will bolt right up, the move the motor back about 4-5 inches to make room for the radiator. Depending on which trans you use the trans off the 7m or the trans off the 22re will depend on how much you have to alter your driveshaft, either way it has to be shortened I believe.

 

Slowly getting there!

 

What're you going to do as far as a grill? Just going to have the intercooler stick out of the front or are you going to attempt to extend the front of the truck a bit?

 

The grill will be modified a little due to the radiator but the IC sits far enough out that it will not effect it.

 

Oh really? Looks like it would stick out further than the grill. Post some pics of what you had to do to get it to fit behind the grill once your finished, pretty please?

 

how's this beauty so far?

 

NAM's back! Woot!

 

Zombie, There is a pusher fan in-between the Rad and the IC. Ill get some better pics to show this next time I am up in Turlock. And NAM!!!!!!!!!!!!!! How was AF boot? Truck is doing ok... Just got a small bug we cant figure out, once this bug has been killed just will be tuning in and having some fun!

 

Thanks gents!
haha it was alright, once i got a hang of things i just started kicking some butt, lol.
Tech school is alright, currently under the inspections -___-

Sweet! hope that gets figured out. what's the bug doing?

 

All good man! I am hoping to pickup E-5 by the end of this month tho.