Hey there, I've been a member over at Toyota Nation and found out about this forum too, Good stuff over here.
Anyways I thought I would start a project thread over here too so here she is

I bought this truck a year ago
'91 Toyota Pickup 2WD 22RE 4Cyl with 190,000mi that i got for $1350.
The engine and clutch have 15,000 mi on them when I got it (or they say)
There are New shocks all around and I did the rear brakes.
Body Damage, but nothing to bad

 

Removed Rear Bumper



Installed Free Tachometer



And Installed my Stereo From my Last Car

 

Bought New 15x7 Cragar Soft 8 Wheels and I already had new 225/60/R15 BFGoodrich Radial T/A
Good Upgrade from the 195/75/R14



Did Some 2wd offroading on some Trails

 

New Bumper off Craigslist for $25....Great Find



New Clear Corner Lights from eBay for $20, I'm gonna paint the Chrome Black





Painted!



Much Better

 

Got a stock clock for $18, Much better then a hole in the dash



Got some clear Turn Signal Lens for $10 off eBay







Free Taillight Covers

 

Nice truck and a good start! What are the total plans for the truck? And what part of Oregon are you from?

 

Im in Eugene, Oregon.
Im planning on lowering it just a little bit, I'm thinking BJ Flip and Either Blocks in the rear or take out a leaf, what do you think?

Other plans is to get a D/S fender and a new/or repair the bed and paint

 

I did Belltech 2" drop spindles, kept most of the factory ride, and 3" blocks. There are quite a few guys on here that did BJ flips, though.

 

hmmm how much drop do i get with just removing a leaf?

 

Not sure, I'd say 1-2"

 

so by doing that and a BJ flip i should be pretty even right

 

You gonna do blocks as well or just remove a leaf?

I'd do blocks first, then go from there.

 

I was thinking of just removing a leaf if thats only 1 -2 in and a BJ flip which is about the same

 

I found 2" blocks for $29 so would that be a better route?

 

I would cause then you could still put a load in it if you need to. I did 3" blocks and left my leafs alone.

 

alright cool thanks man.....now thats figured out i need to figure out what else i want to do lol

 

Where should i get a grille from? Has anyone bought from Rockauto.com they have one for $32 including shipping

 

i just recently bought engine parts...no complaints here, i would buy from them again

 

I ordered my front end from a local junk yard.

 

Bought some 2in Blocks today