Front shocks don't need to be relocated at all if you use shocks for a 92 chevy s10 blazer. They're bout 2" shorter but still bolt into the stock...
On my new truck it came with airshocks but the flatbed and tool boxes meant I had to keep 60 psi in them to keep it off the bumpstops with only a...
The flasher relay on our generation is up by the column on a bracket. A 2 prong flasher works perfectly. If it doesn't work one way put it in the...
I've been thinking about this lately, my new DD has the same brake mods as my autocross truck and it stops killer but big brakes are never a bad...
Nope taking the head off the center pin that wait for it... centers the axle on the sprinkler gs makes so much more sense. The steering wheel...
You what? Are you saying the centering pin in the leaf spring was too large for the block so you ground the head off and installed the blocks?
I'm on several 4x4 message boards and I was into wheeling for many, many years so I have contacts all over the area. 3rd members are cheap and...
Nothing. Just a bare key, if it wasn't for having to use the key to open the fuel door it would never leave the ignition.
Flip the 4runner bar upside down and mount it under the axle. Everything clears rather nicely. I welded the factory 4runner end link mounts to...
Good luck finding a shop willing to do the work but yes that is the bore diameter.
The shift rail on the 6 speed is easily modified. That's my plan for the truck so I don't bang my knuckles on the back of the cab. :ROFL:
Hit the green tab at the top towards the left of the main page.
Imgur. Fawk photobucket.
Interesting idea. The issue would be the bellhousing. Even if the 5vz could bolt in place of a 3sge that doesn't make it bolt up to a W series...
Not yet, we were busy getting ready for harvest and now we're balls deep in it until November. I've done more research and it's looking like an...
Your information is good, I have a '76 axle sitting next to the garage. 2wd V6 or any 79-95 4x4 (including 79-85 front) rear 3rd will drop right in
Spindles and wheel bearings are waaaaay different. Axle shafts can be swapped out back in some instances but an earlier rear axle from 79-85 is...
I've had a pile of different headers over the years. Most brands fit and get most of the exhaust out the back but the 2 different LCE models I've...
The single wire is for the clutch on the nonexistent A/C compressor and the double wire is for an emissions piece that you do not have. Not all...
Separate names with a comma.