[ATTACH] And bellcrank cantelever to double arm linear set up it is....
[ATTACH] Soooo, that last lift bar set up was a bust:( no room for the bag to be where it needed to b on the bar without a bunch of goofy shit to...
[ATTACH] [ATTACH] Got some more done yesterday. Made bent bars to go up from rear ladder assy up to the main crossmember. made my lift bars out of...
[ATTACH] [ATTACH] [ATTACH] Got a bunch more done on the rig this week. Made a ladder bar center section going from the carrier bearing...
[ATTACH] [ATTACH] Relocated the uca mounts two inches foarward and added slotted mounting holes so the uca has full caster adjustment and the...
[ATTACH] Sits flat all the way around with 3/4" blocks under the frame and wheels to simulate being on the ground since I haven't cut the rockers...
@Mikerocosms Yeah looks like just a couple extensions for the breather tube and the filler neck will get em to bolt right up in the stock spot the...
[ATTACH] The tank has found its new home 4.5 inches forward and 3/4" up from the stock spot... had to cut the cab floor to match
[ATTACH] Radius capped the corners of the frame where I cut the section out and boxed in the remaining areas between the cab and kmember. Also...
[ATTACH] Put the tank up in its og location to see what I gotta do to keep it there... so u can see here I cut a notch out of the sub frame to...
[ATTACH] Theres a 4runner crawler rebuild next to my truck at the shop so I figured what better time to see how my clearances will be with his...
[ATTACH] Got the IRS subframe mounts and the frame cap/fishplates all welded in, not the prettiest, but it's solid af.. next week I'll either get...
[ATTACH] That matching camber tho! Technically since I don't have the rockers cut I should have 3/4 blocks under wheels for an accurate view of...
[ATTACH] Doesn't quite lay all the way and I haven't cut the 3/4" out of the rockers yet. The 240irs bushings won't go full bump w/out the weight...
[ATTACH] Nice to see it on the ground for the first time for a minute. I thought I liked the front wheels better but those wires look really good...
[ATTACH] Got the k member mostly welded in, frame sections cut out and the 240 rear end bolted up and in its home.
As for the Nismoyota Got the new 2x4 xmember and one side of the 2x3 'k' leg off of the xmember to the frame tacked in place behind and over the...
[ATTACH] Cool shot of the 18's thru the gasshole
[ATTACH] Oh yeah it smashes plates
[ATTACH] Here's the bed of the grey 87 yota
Separate names with a comma.