They can be a PITA to get to...located inside the firewall up behind the blower motor somewhere. Some are low and some are higher up.....not sure...
For those with faulty blower switch positions....the likely cause is the blower motor resistor......they run about $15-20 at a Stealership. P/N...
Change fuel filter (they are cheap)...and while you're at it and have the lines disconnected, verify the pump pumps like it should. I highly...
The usual reason they strip is the bracket that bolts to the bell housing, that the exhaust pipe is supposed to clamp to, is usually gone or...
I'm reluctant to ask but how much for the stock air box and intake piping less the MAF?
Time for new tires (one is rather bald in the center) so I was test fitting the Daytons on my Humper truck......Undecided on weather I'll put...
That's a fair offer but how about $45? Saves ya $5 and still makes it worth both our efforts.
shackles $14.30 to ship a 5lb box of shackles via UPS Ground to 20109.
collected parts..... Ran home on a sales call and snagged the parts..... Didn't know if you needed some stock shackles and I have several pair...
seat belts & rear spring plates OK, I'll dig them out this evening, bring them to the office with me tomorrow, have my shipping department dummy...
I believe I have some blue seat belts from a 93 or 94 4wd I bought wrecked...then stripped down and scrapped a few years back. What color is your...
The front of the bottom bracket has a slip sleeve that tightens against the body of the alternator when the bolt is tightened. When the bolt and...
Bender.... I have a PT105HD. Converted to full hydro using farm store ram and a pump from my day job. Here's a pic of it in the back of my...
Jetas is right....cheap ones will take some massaging and/or shimming to make them fit right. The last few body panel & lights I've bought have...
Little late but I believe I have a pedal assembly from a 93 4wd in an old truck box in the back yard. If you need it for cheap, let me know.......
Nice! [IMG]
Yes, that would be a correct statement BUT.....85 and later 22r/re heads (with pear shaped exhaust ports) will not work on the early blocks...
beepbeep Holy freaking Shiat......175db is LOUD! Nice mod man!
:waytogo: A 20R head on a 22R pre-laser block raises static compression and will produce more power through the entire RPM range than any cam....
No offense taken. I enjoy some good banter......but the info does go with his engine. The method of induction makes no difference to the cam.
Separate names with a comma.
