Don't quote me but its my understanding that the v6 pickups and 4runners have 3 core radiators that bolt up in the same place as the 2 core you...
I was going to say the VW TDI engine, somebody on the forum here did it into a pickup, there is a build thread I will try and find...
Yeah dont scrap it! Someone took a stout to the scrapyard near me (there is a thread about it somewhere). A guy on Pirate spotted it when he was...
now thats damned tempting :(
Yeah, if your missing the obvious signs like oil in coolant, coolant in oil, cool spot on radiator, and no flow, Id check the temp sensor. When I...
Is it overcharged? If there is too much refrigerant then the evaporator pressure may be too high at higher RPMs and isnt able to suck up heat....
Again! So I was driving back home (from Fort Worth to College Station) and about 2/3 of the way there it all of a sudden overheated, I pulled...
Looks like my starting problem was the igniter module, I replaced it and the coil and it fires right up with the key :D
So I was shooting the **** at the parts store, didnt notice any rattling in the cat so that should be alright, but the guy behind the counter...
So I was watching it run, and it looks like I get a sort of smokey thing coming out of the valve cover vent up front, would that be like blow-by...
Oh right, I replaced the fuel filter to begin with, the one on the block was leaking out the lever side. Found that out when it stalled out at a...
A few weeks ago my 22r blew a head gasket, and I was able to replace it, the head didnt seem warped when I held it to a strait edge any kind of...
yeah Im retarded :doah: double checked the manual and I was looking at head bolts, I remember thinking "geese these look kinda thin... but if the...
So after my head job I noticed oil leaking out around my valve cover, so I thumbed through my Chiltons guide and saw that the valve cover bolts...
Im in the same boat, the top right manifold bolt, closest to the firewall is stripped out, just far enough in that I can compress the lock washer...
It was gone on arrival ;_; on the scrap truck to Waco
Saw this on Pirate, he seems to think its $0.25/lb to take metal out, I plan to go take a peek at it tomorrow, if anybody needs some Stout parts...
Looks like it was just fuel filter and dirty carb, I sprayed it down and swapped in a fresh filter, it ran a little rocky for about an hour and...
I just put vacuum caps over the ends, I am led to believe all the engine really needs is the vacuum advance line to the distributor, the rest is...
Im not sure what they are, but I clipped mine of yesterday :D I want to say I traced them back to a solenoid or something on the passenger side...
Separate names with a comma.