Four pages of nothing, after doing a search on the OP's name and reading some of his questions and replies I understand now. I wish threads like...
Look, I can see how one poster in this thread may have seemingly pooped in your Cheerios and put you on the offensive but you have to get over...
All anyone can get from your answer is you either have no clue what the specific mechanical problem was (you said you found something), you're...
Were not building a competition ProStock combination here. If you need to ask for help with something you should be willing to state exactly what...
Probably a stupid question but what KYB's do you have? The Gas-a-Just are softer than the MonoMax. MonoMax are red while the Gas-a-Just's are...
I went to a salvage yard today and found out I had it wrong. This is my first time dealing with the rear of any Toyota truck so I thought it would...
Also check for a faulty egr modulator. Also check the large hose between the air meter and the throttle body. That allows air to bypass the...
I don't know much when it comes to emissions stuff but from what I understand high NOX is most often caused by a somewhat plugged or totally...
And I know you don't want to hear this but it doesn't sound like LCE is giving you the runaround. What they're having you do is called diagnosing...
Maybe it's wiping a cam lobe? There have also been cases of cam REgrinders messing up. There is a thread over on yotatech where two people had a...
^ In his very first post on the issue. Later on he mentioned the bottom end is rebuilt so combined with a new head the compression and leak...
That was next on my list, but it's not ignition. Aaand I don't think it's that easy to check.
So I'm having a bit of trouble with my swap. Almost all of the 7 1/2" is unbolted and I got the 8" cleaned up and waiting. Turns out the...
The oil shouldn't be there. Have you checked the distributor for excessive shaft play? I'm running out of ignition checks. Have you checked the...
Was this same thing happening BEFORE you replaced the plugs, cap & rotor? You of course gaped the plugs to .031? These are pretty much the...
Separate names with a comma.