Does anyone know if these (brackets) are still floating around? If so, I'd very much like to purchase a set. If not, is there a possibility to get another batch made?
Nope, he made his last batch a couple months ago. He was selling these brackets in batches at the asking price of $500. I tried contacting him numerous times just trying to get a set. He seemed to have no interest in selling them one set at a time. When I get back to working on my 90 I'll just make my own brackets from scratch.
Thanks for the response. Going back through the last page there is a total of four members, you and I included, that inquired about a set. If we all spent $125 a piece that would cover the $500. I don't see a problem getting this going if everyone's on board and ready to pay.
@TRUCK ACTION when you did the front brakes did you have to use any washers? and how long. I bought these brackets and had to use alot of spacers to fit right. I just dont fee comfortable with that many.
If I remember correctly I did have to get longer bolts & only used one lock & one flat washer per bolt & use only grade 8 bolts!! Only thing that I had to do somewhat different is trim a portion of the 4-Runner caliper where it was hitting the spindle which is a Belltech 2'' dropped unit!!
hmmm.... i need to take a look at mine again.... might be going with the LCE big brake upgrade if i cant figure this out. Really dont want to go with LCE since its so expensive.
yea....lemme think about it, gotta get to finish my swap first, but ill keep ya in the loop if i decide to go that way..
Nissan 300z calipers bolt on without adapters. Use 1994 Mazda MPV front rotors, 94 Landcruiser pads and alittle machining of the toyota hub. Details are in my build thread.
86-95 Toyota 4x4 or 4 Runner the calipers have 3 raised ridges on them . Can find used on line or new at Napa stores, probably new on line also!
E-mail me for info & photo's & if you Goggle best prices for the part numbers you'll find sources! Prices probably have change from my sources!!
For anyone who may be interested: I have a pair of those brackets I purchased from guy back in 2010 that I never got around to using. I also have a pair of used 4wd calipers from the junk yard that I have test fitted, but not used. PM me if you want them! comes with two bolts, but you will need to supply the other two.