So im having some problems.. My windsheild wipers stop in the middle of my windsheild.. If I take the arm of and correct it by puting down at the bottom of the windsheild then turn them on my wiper runs down my hood and then part way up my winsheild.. Is there a way to clock it or do something so the ending point will be at the bottom of the cycle and not in the middle?

 

maybe the grooves on your windshield wiper mounts are ground down? so they are slipping in the wiper arms?

 

take them off, turn your wiper on let it reset and then install it

 

Yea I already did that and it did nothing its not reseting in the right place like I said... it goes back to the middle

 

Have you tried using the FSM?

Troubleshooting:
http://personal.utulsa.edu/~nathan-buchanan/93fsm/bodyelectrical/5wiperand.pdf

 

Have you checked the wiper motor? Maybe the motors going bad

 

either the motor gears are stripped or the wiper mounts are stripped. Are both arms doing it exactly the same or is one acting OK? (if one's OK, it's the mount. if they're both whacked out, it's the gears and you need a new wiper motor assembly)

 

I am in the middle of repairing mine. Same symton. Got a new assembly, but looks like the motor is bad too. Will swap out with my cluncker and report back on what is need.

 

If you need any wiper motor parts I will be more than happy to give you mine. I don't know where you are located , but all my stuff is coming out anyway providing you pay shipping. All my stuff is in great working order. Just an option...

 

Shaving them completely?

 

Yes sir. Smoothing out the cowl

 

Okay. Just done swapping wiper motor and seems like motor is not bad on mine. I got a new wiper relay arm install and just need to adjust it right.